ATS 200M ECONOMIC DIGITAL FLAME PHOTOMETER
___________________________________________________________________________
The new Swiss Design ATS 200M Modern Digital Flame Photometer, Model ATS/20903 meets the requirements of both, small private laboratories as well as larger laboratories that have few daily analyses to perform. The ATS/20903 model has an automatic electronic flame ignition with an automatic dual safety gas cut-off in case the flame extinguishes, and/or if the electricity is cut off.
Applications include: biochemistry and clinical chemistry, renal dialysis analysis, environmental applications (water, waste waters, etc.) oil, petrochemicals, breweries, wineries, food & beverage (milk, soft drinks, etc.), cement, glass, metallurgy, mining, veterinary laboratories, agriculture (plants, soils, fertilizers, animal tissues, food & feeds, etc.), pharmaceutical quality control and many others.
Technical specifications:
| Read-out: | digital, bright 3½ digits DPM Display. |
| Range: | 0-199.9 (selectable decimal point). |
| Measuring Units: | ppm, mEq/l, or mmol/L. |
| Filter Holder: | 6 position filter wheel. |
| Measuring Ranges: |
| Science & Industry Model: | Clinical Model: |
| Na 0 to 200 ppm | Na 0 to 200 mmol/L |
| K 0 to 100 ppm | K 0 to 200 mmol/L |
| Li 1 to 200 ppm | Li 0 to 6 mmol/L |
| Ca 1 to 200 ppm |
|
Specificity:
|
if Na, K, Ca & Li are present in the sample in an equal amount as the Na or K being measured, the interference on the signal reading will be less than 0.5%. |
| Linearity: | |
|
Science/Industry: |
typically better than 1% for 3 ppm Na or K, set to read 100 and measured at mid scale. |
| Clinical: | Na 115-170 mmol/L +/- 2 mmol/L at 140 mmol/L |
| K 1- 6 mmol/L +/- 0.2 mmol/L at 4 mmol/L | |
| Li 0- 3 mmol/L +/- 0.2 mmol/L at 1 mmol/L | |
| Clinical samples dilution ratio 1:200 or 1:100 | |
| Sensitivity: | typically, Sodium 2 ppm; Potassium 2 ppm; Lithium 3 ppm, |
| Calcium 40 ppm (concentrations that will produce a display of 100 digits or more). | |
| Repeatability: | better than 1% CV for 20 consecutive readings (10 ppm Na or K). |
| Response Time: | fast readout in 6 seconds. |
| Read Time: | selectable: continuous, or set at 6 seconds. |
| Detection Limits: | Na, K, Li, 0.09 ppm; Ca 5.00 ppm, Ba 20 ppm. |
| Solution Consumption: | typically 3 ml/minute |
| Solution up-take range: | 2 to 6 ml/minute. |
| Sample size: | typically less than 20 µl for clinical samples (important for pediatric samples). |
| Fuel supply: | normal grade butane, propane, or L.P.G. (household size cylinders), that require no special regulators. Can also be used with natural gas with an appropriate regulator. |
| Air supply : | by air compressor, oil & water free, or from direct line using appropriate air regulator and filters. |
How to order:
| ATS/20903 | Modern Science/Industry Flame Photometer Model ATS 200M for Sodium (Na) and Potassium (K) determination. Complete with start-up kit for Na-K, Instruction Manual and Dust Cover, for 220/240V, 50/60Hz. |
| ATS/20940 | Modern Clinical Flame Photometer for 220/240V, 50/60Hz |
| ATS/20917 | Modern Clinical Flame Photometer same as above but with piston micro syringe auto dilutor (accuracy 0.05% C.V.) For 220/240V, 50/60 Hz. |
| ATS/20164 | Air Compressor, 220/240V, 50 Hz; |
| ATS/20167 | Kit Air Separator |
Other voltages/frequencies available.
| Optionals: | high quality optical filters for elements such as Li, Ca, Ba,..., dilutor, recorder output, printer and many other accessories. |