ATS 200MKI HIGH PERFORMANCE FLAME PHOTOMETERS (HPFP)Ô

The ATS 200 MKI High Performance Flame Photometer (HPFP)Ô Series comprise a range of high sensitivity atomic emission (AE) analysers, each either optimised for specific applications or outfitted with accessories to permit varying degrees of automation up to a completely automated analysis system. Such advanced automation ensures an analysis to be of high quality even when run by untrained personnel; variables dependent on operators' skills are eliminated and so are many manual tasks, often a source for errors.

The unique features of the ATS 200 MKI Series High Performance Flame Photometers (HPFP)Ô

  • increased sensitivity
  • wider measuring ranges
  • wider straight segment linearity
  • simplified sample preparation procedures
  • faster fixed measuring cycles: 10 seconds (with computer a shorter integration time is possible)
  • direct concentration readout possible
  • dependability with good short and long term precision
  • minimal memory effect
  • reduced need for laboratory bench space
  • reduced consumables requirements
  • reduced industrial waste
  
Measuring ranges: Sensitivity:

Na

 0 - 200 ppm;
K 0 - 200 ppm;
Li 0 - 200 ppm;
Ca 1 - 600 ppm;
Typically: Sodium 1 ppm
Potassium 1 ppm
Lithium 3 ppm
Calcium 30 ppm
  (Concentrations that will produce a display of 100 digits or more).

Specifity:

Interference from Na, K and Li equal in concentration to test element will be less than 0.3%.

Detection Limit:

Na, K and Li 0.05 ppm
Ca 0.8 ppm

Applications include:

  • Environmental analysis (water, waste waters, etc.)
  • Agriculture (plants, soils, fertilizers, etc.)
  • Veterinary laboratories (animal tissues, food & feeds, etc.)
  • Beverages (milk, soft drinks, wine, beer, etc.)
  • Pharmaceutical quality control
  • Education (teaching institutes)
  • Petrochemical laboratories
  • Cement
  • Industrial quality control and many others.
  

ATS/20960 High Performance Flame Photometer (HPFP)Ô is a general purpose stand-alone analyser with very high sensitivity and optimal performance with an RS232 PC interface for connection to a computer which will greatly extend its range of application.

Accessories

ATS/20164 Air Compressor
ATS/20167 Kit Air Separator
ATS/20014 Printer (has to be factory installed).

Other accessories and consumables are available.

Specifications subject to change without notice.